Monday, August 19, 2019
The technology in today's laboratories is required to achieve timely progress and remain competitive - automated laboratories would not exist without advancements in laboratory automation.
But while the laboratories are concerned about reducing the TAT for blood sample analysis, they often experience lack of space for new equipment which can help automate and streamline the analysis work.
The Tempus600 solution helps laboratories overcome these challenges. It is the fastest way to transport blood samples from the ward to the laboratory and, at the same time the system takes up minimal space in both the ward and the laboratory.
Via the Tempus600 solution, the samples tubes are efficiently delivered from the ward to the laboratory through the dedicated point-to-point system to fully automated, semi-automated or manual laboratories.
When arriving in the laboratory the sample tubes are gently slowed down in the Tempus600 Connection Module mounted on top of a bulk loader, sorter or GLP systems Track. From here they are automatically transferred onto e.g. a track.
Alternatively, the sample tubes can be received in the Tempus600 Receiving Tray, a small wall mounted tray which is easy to fit in most locations. From there they are ready to be picked up by the laboratory staff.
Tempus600 is, among others, connectable to systems from the following manufacturers :
Save time and optimize space in busy labs;
/Default.aspx?ID=1111&newsid=199&Action=1&PID=4787
Menu
Brogesvej 18
DK-7441 Bording
Tel. +45 8686 5762
info.dk@sarstedt.com
